What kind of project are you planning?
Every ambitious project starts with a conversation. Tell us what you want to create; we'll help you understand the structure, the constraints, and a practical way forward.
How do you want to participate?
Choose the project path that fits your plans.
Not sure where to start? Book a site conversation →

Meet Darren Watson, Principal Engineer.
Darren brings the whole project into the room: your goals, your building, your budget, and the people who will bring it to life. Engineering works best when everyone is working from the same plan.
"If you're engaging with Sterling-Watson Engineering, you're getting the whole thing." — Darren Watson
Get to know DarrenPlan better from the beginning.
Explore practical questions and common pitfalls before you commit to a commercial project.
Explore the guidePreview: final PDF and download form still to be connected.
Stock image: replace with project photographyWhy call a structural engineer before the contractor?
Before you sign the lease. Before you call the contractor. Before you remove a single piece of drywall. Early structural input can reveal costly constraints while you still have options—not after the plans are fixed and demolition has begun.
A Santa Monica client wanted a column out of her kitchen. When we drew the building, that column ran through the parking level below and the bedroom above. Removing it meant a 700-pound beam and shoring for the whole structure, about $50,000 for one change. We caught it before demolition, designed the kitchen around it, and the island now sits right on it.
Engineering is usually cheaper before the surprise.
What does Sterling-Watson engineer?
If people can walk into it, we can help engineer it. Commercial spaces, existing buildings and homes across Southern California.
Commercial tenant improvements
Restaurants, medical and dental offices, retail and office. We help you get the doors open.
ExploreS-02Wall & column removal
Walls, columns, beams and wide openings, engineered before the demo.
ExploreS-03Soft-story & seismic retrofit
Compliance and safety, designed to keep your parking usable.
ExploreS-04Hillside & foundations
Topanga and canyon soils, existing foundations, getting it right the first time.
ExploreS-05ADUs, additions & rebuilds
New units, new stories and fire rebuilds with a clear load path.
ExploreStart hereSite consultation
One visit from the principal engineer. A straight answer before you commit.
Book a visitWhat happens when you call us first?
We walk it.
Darren, the principal engineer, comes to the first site visit. We look at what the building can and can't do before you commit to anything.
We tell you what it takes.
Our first question is usually "What's your budget?" Not to kill the idea, to keep it alive. You get real options with real costs.
We stay in the room.
Complete plans for plan check, answers for your contractor in the field, and structural observation through construction. You get the whole thing.
A 40-foot opening is a steel problem. Two 20-foot openings are a design choice.
A single 40-foot opening needs a deep steel beam and serious installation cost. Put one column in the middle and you have two 20-foot openings: a smaller beam, a lower profile and a fraction of the cost. There are plenty of ways to make that column look like it was always meant to be there.
That's what we mean by protecting the vision and grounding it in reality. Planning to open up a wall →
Stock image: replace with project photography"The finished work has to be as good as the work behind the wall."
Darren's grandfather was an electrician in Jamaica who lined up the slots of every screw on every switch plate, so his work could never be mistaken for anyone else's. Most of what a structural engineer designs, you will never see. That is exactly why it has to be right.
Who do we work with?
When the team runs different plays, the client pays for the confusion. We run one playbook.
Good, quick, now.
Call before you change it, not after. We pick up the phone.
For contractors →Before the lease.
A problem found early costs a conversation, not a delayed opening.
Tenant improvements →Bring the weird ones.
Our job isn't to flatten the design. It's to make it buildable.
Start a project →Before the hammer.
A remodel, an ADU or a build on the hill, engineered before demo.
ADUs & additions →BUILD NOTE · Reviews strip goes here: 3 real client reviews (first name, project type, neighborhood) pulled from Google Business Profile. Do not launch with placeholder reviews.
Do I need a structural engineer, or can my contractor handle it?
If the work touches anything that carries load, like a wall, column, beam, foundation or roof, you need a structural engineer, and Los Angeles permits will require stamped plans. A good contractor knows this and will tell you. A contractor's "yes" is not a structural answer.
How much does a structural engineer cost in Los Angeles?
A Sterling-Watson site consultation typically runs $400 to $500 verify, and design fees depend on the scope. The fee is a small part of the real cost of a project. A thin or late plan set leads to corrections, change orders and delays that cost far more than the difference in fees.
How long does it take to get structural plans approved in Los Angeles?
In our experience, plan on about four months for many projects. Roughly six weeks is design and calculations; initial plan check with the City of Los Angeles commonly takes 8 to 12 weeks, plus clearances from other departments. A complete, coordinated submission is the best way to avoid extra review rounds.
What areas does Sterling-Watson serve?
We are based in Los Angeles and serve commercial and residential clients from Santa Barbara to San Diego, including Santa Monica, Venice, Topanga, Malibu, the San Fernando Valley and Downtown LA.
Planning something?
Call before you call the contractor.


