PREVIEW BUILD · Yellow tags mark details Darren must confirm before launch. Forms do not submit.
Service

Before you open the wall, know what's holding up the building.

A new opening changes where loads travel. We evaluate beams, posts, shear walls, foundations, and connections so your remodel has a structurally sound path forward.

"Just move that wall and put in two posts and a beam." It sounds simple. It usually isn't. The loads that wall carries have to be traced down through the building to the foundation, and there are almost always conditions you can't see until the drywall comes off. We tell you what's behind it before anyone swings a hammer.

Building facade with large glazed openingsStock image: replace with project photography

How do I know if a wall is load-bearing?

A wall's appearance is not enough to tell you what it supports. The framing direction, roof or floor loads, existing drawings, and field conditions all matter. An engineering assessment helps identify the load path before demolition.

Is that wall a shear wall?

Some walls resist lateral forces from wind and earthquakes in addition to gravity loads. Removing one may require a new lateral-force-resisting system—not simply a replacement beam.

Is one big opening or two smaller ones cheaper?

OPTION A · ONE 40'-0" OPENING OPTION B · ADD ONE COLUMN DEEP STEEL BEAM, ~18" SMALLER BEAMSMALLER BEAM 40'-0" 20'-0"20'-0"
DETAIL 1 · Same feel, a fraction of the steel. Diagrammatic, not to scale.

Usually two. A 40-foot opening needs a deep steel beam and serious installation cost. Add one column in the middle and you have two 20-foot openings: a smaller beam, a lower profile and a fraction of the cost. There are plenty of ways to make that column look intentional.

What if the column has to stay?

Then we design around it. Sometimes the best solution isn't removing the column. It's making the column feel intentional, like the Santa Monica kitchen island built right on top of one.

Wall and column removal FAQs

Do I need a structural engineer to remove a load-bearing wall in Los Angeles?

Yes. Removing a load-bearing wall changes how the building carries weight, and LA will require stamped structural plans for the permit. The engineer designs the new beam, posts and footings and checks what's hidden behind the drywall.

How much does it cost to remove a load-bearing wall in LA?

It depends on what the wall is carrying. A simple beam and posts is very different from replacing a shear wall with a steel moment frame, which on a house can run around $100,000. A site consultation tells you which situation you are in before you budget.

Can I remove a column in my condo or house?

Technically, most things are possible with a budget and a timeline. But a column may be carrying more than one floor. We draw the building first so you know whether removal is a few thousand dollars or a $50,000 change.

What is a moment frame and why is it so expensive?

A moment frame is a rigid steel frame that resists earthquake forces when a shear wall is removed. It requires engineered welded connections, shoring, getting heavy steel into the building and on-site welding, which is why it costs far more than plywood.

Should I call the engineer or the contractor first?

The engineer. Or at least call us second and have us walk the site with your contractor. Engineering is usually cheaper before the surprise.

"I can keep people as aspirational as they want to be, and still keep them realistic." — Darren Watson

Before you pull out a single piece of drywall, call your structural engineer.